3-Bit Digital-to-Analog Converter with Mechanical Amplifier for Binary Encoded Large Displacements
نویسندگان
چکیده
We present the design, fabrication, and characterization of a MEMS-based 3-bit Digital-to-Analog Converter (DAC) that allows generation large displacements. The DAC consists electrostatic bending-plate actuators are connected to mechanical amplifier (mechAMP), enabling amplification output displacement. Based on parallel binary-encoded voltage signal, displacement system can be controlled in an arbitrary order. Considering we simplified analytic model, which was confirmed by FE simulation results. fabricated systems showed total stroke approx. 149.5 ± 0.3 µm linear stepwise 3 bit correlated 23 ? eight defined positions at control 60 V. minimum switching time between two input binary states is 0.1 ms. experimental derive influence mechAMP functionality DAC. Furthermore, resonant behavior speed analyzed. By changing electrode activation sequence, 27 achieved upgrading into 3-tri-state (33) system.
منابع مشابه
signal specific successive approximation analog to digital converter
چکیده: در میان انواع متفاوتی از مبدل های آنالوگ به دیجیتال که تا کنون معرفی شده اند، مبدل های آنالوگ به دیجیتال تقاریب متوالی(sar ) به علت سادگی ساختار و همچنین توان مصرفی کم، همواره یکی از پرکاربرد ترین مبدل های آنالوگ به دیحیتال در کاربرد های بایومدیکال بوده اند. به همین دلیل تاکنون روش های متعددی برای کاهش هرچه بیشتر توان مصرفی در این مبدل ها ارائه شده است که در اکثر آنها توجهی به مشخصات سی...
15 صفحه اول16-Bit Monolithic Digital-to-Analog Converter
The PCM54 and PCM55 family of converters are parallel input, fully monotonic, 16-bit digital-to-analog converters that are designed and specified for digital audio applications. These devices employ ultra-stable nichrome (NiCr) thin-film resistors to provide monotonicity, low distortion, and low differential linearity error (especially around bipolar zero) over long periods of time and over the...
متن کاملDesign of 10-bit Digital to Analog Converter Using Cascaded Operational Amplifier Topology
This paper proposes an approach for designing a R-2R 10 bit Digital to Analog Converter (DAC) which could be made to operate at low voltage supply by efficiently exploiting the cascaded Operational Amplifier (Op-Amp) architecture. The DAC operates at a 3V power supply with a settling time of 50-100ns , dynamic range of around 50-60 dB for signals upto a frequency of 10Mhz. Graph & simulation re...
متن کاملDesigning an Integrated All-Optical Analog to Digital Converter
We present the procedure for designing a high speed and low power all-optical analog to digital converter (AO-ADC), by integrating InGaAsP semiconductor optical amplifier (SOA) with InP based photonic crystal (PhC) drop filters. The self-phase modulation in the SOA can shift the frequency of the Gaussian input pulse. The two output PhC based drop filters are designed to appropriately code the f...
متن کاملa 10-bit 50-ms/s parallel successive-approximation analog-to-digital converter
applications such as high definition viedeo reproduction, portable computers, wireless, and multimedia demand, and ever-increasing need for ligh-frequency high-resolution and low-power analog-to-digital converters. flash, two-step flash, and pipeline convertors are fast but consume large amount of power and require large area. to overcome these problems, successive approximation converter blo...
15 صفحه اولذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Actuators
سال: 2021
ISSN: ['2076-0825']
DOI: https://doi.org/10.3390/act10080182