2183 Tests on Reinforced Column subjected to Tension, Bending and Shearing Force(Structures)
نویسندگان
چکیده
منابع مشابه
Finite Element Modeling of GFRP-Reinforced Concrete Interior Slab-Column Connections Subjected to Moment Transfer
A finite element model (FEM) was constructed using specialized three-dimensional (3D) software to investigate the punching shear behavior of interior slab-column connections subjected to a moment-to-shear ratio of 0.15 m. The FEM was then verified against the experimental results of full-scale interior slab-column connections reinforced with glass fiber reinforcement polymer (GFRP) bars previou...
متن کاملNumerical and Experimental Investigations on the Behavior of Steel-reinforced Concrete Columns Subjected to Eccentric Loading
Steel-reinforced concrete (SRC) columns, which are classified as composite columns, became the most widely used in recent years; because of their extensive advantages over the reinforced concrete and the steel columns. In this paper, the ductility index and its influential factors were explored to investigate the behavior of SRC columns. A straightforward approach was then proposed by establish...
متن کاملbending and shearing properties of safflower stalk
the research was conducted in order to determine the bending stress, young’s modulus, shearing stress, and shearing energy of safflower stalk as a function of moisture content and stalk region. the bending forces were measured at different moisture contents and the bending stress and the young’s modulus were calculated from these data. for measuring the shear forces, the stalk specimens were se...
متن کاملStress Concentrations for Straight-Shank and Countersunk Holes in Plates Subjected to Tension, Bending, and Pin Loading
A three-dimensional stress-concentration analysis was conducted on straight-shank and countersunk (rivet) holes in a large plate subjected to various loading conditions. Three-dimensional nite-element analyses were performed with 20-node isoparametric elements. The plate material was assumed to be linear elastic and isotropic, with a Poisson's ratio of 0.3. Stress concentrations along the bore ...
متن کاملPropagation of Matrix Cracking and Induced Delaminatin in Cross-Ply Composite Beams Subjected to Bending Loads
Due to the mismatch of mechanical properties in composite laminates, propagation of delami-nation is considered as a severe damage mechanism in beams with various lay-up configurations. Delamination can be generated due to matrix cracking propagation or it can also be initiated due to the manufacturing process before using composite beams. Using a micromechanics model, this study is aimed to in...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Transactions of the Architectural Institute of Japan Summaries of Technical Papers
سال: 1967
ISSN: 2433-0035
DOI: 10.3130/aijsaxxe.42.0_327