2118) Research on Adhesive Joint for Structures of Aluminum Alloy (2)(Structure)
نویسندگان
چکیده
منابع مشابه
The piezoresistance of aluminum alloy interconnect structures
The effects of applied strain on the resistivity of Al thin film metallization interconnects have been measured with a novel methodology that uses thermal expansion mismatch to produce the strain. The interconnect volumetric strain is induced by thermal cycling of passivated and unpassivated interconnects between '70 and 373 K. The coefficient of piezoresistivity, defined as dr/dev, where r5res...
متن کاملEffect of Temperature on Diffusion-Bonded Joint of AZ31 Magnesium and 7075 Aluminum Alloy
In this study, the effect of temperature on the diffusion welding of AZ31 magnesium alloy and 7075 aluminum was discussed. Diffusion welding temperature was the most important parameter since all mechanisms are sensitive to temperature in Diffusion welding method. Intrusive contacts between the two alloys at temperatures of 430, and 440 °C 450 and took 60 min. In all tests constant pressure and...
متن کاملEffect of Temperature on Diffusion-Bonded Joint of AZ31 Magnesium and 7075 Aluminum Alloy
In this study, the effect of temperature on the diffusion welding of AZ31 magnesium alloy and 7075 aluminum was discussed. Diffusion welding temperature was the most important parameter since all mechanisms are sensitive to temperature in Diffusion welding method. Intrusive contacts between the two alloys at temperatures of 430, and 440 °C 450 and took 60 min. In all tests constant pressure and...
متن کاملTesting Application of Scanning Acoustic Microscope for Adhesive Characteristics of Explosive-Aluminum-Alloy Interface
The working principle of scanning acoustic microscope (SAM) is introduced, and the acoustic transmission action is analyzed according to the geometrical and structural characteristics of explosive/Aluminum-alloy binding. The adhesive status of the interface in some typical parts of the binding is detected by SAM and 30MHz ultrasonic focal field lens. The results show that the interfaces between...
متن کاملFriction stir welding of dissimilar joint of aluminum alloy 5083 and commercially pure titanium
In this study, commercially pure titanium and aluminum alloy 5083 in connection rotational speed of 1120 rpm and a feed rate of 50 mm per minute for butt welding by friction stir welding has been successfully completed. Micro-structure, hardness and tensile test was conducted on the connection. Welding area is a composite of aluminum and titanium particles that the particles plays an important ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Transactions of the Architectural Institute of Japan
سال: 1962
ISSN: 0387-1185,2433-0027
DOI: 10.3130/aijsaxx.76.0_164