2114) A Photoelastic Tests on High-Strength Bolted Structural Joint(Structure)
نویسندگان
چکیده
منابع مشابه
Bolted Connection Strength and Bolt Hole Size
This study investigated the effects of oversized bolt holes on the properties of bolted connections with steel side members. The intent of the study was to determine (1) how well the European Yield Model (EYM) predicts experimental results for connections with oversized bolt holes and (2) how the loaddeformation behavior of connections is affected by oversized and/or misdrilled holes. Variables...
متن کاملA review on stress distribution, strength and failure of bolted composite joints
In this study, analytical models considering different material and geometry for both single and double-lap bolted joints were reviewed for better understand how to select the proper model for a particular application. The survey indicades that the analytic models selected for the adhesively single or double bolted lap joints, as well as T, scarf, and stepped joints, with linear material pr...
متن کاملPush-out tests on shear studs in high strength concrete
A lot of push-out tests of shear studs embedded in normal strength concrete were conducted. So current design code methods of the shear studs are based on the test results of studs embedded in normal strength concrete. It also appeared that the strength of connector and the concrete strength are the main factors affecting the behavior of shear connections. But push-out test data of studs embedd...
متن کاملRecent Advances in Bolted composite Joint Strength Prediction
AMPTIAC Directory ... 15 The beginning In late 1993, the Mechanics and Surface Interactions Branch of the Air Force Research Laboratory’s Materials Directorate (AFRL/MLBM) was tasked to investigate the accuracy of the analysis methods used to predict the strength of bolted composite joints used on high-performance fighter aircraft such as the F-22 Raptor. The strength of bolted joints is essent...
متن کاملStructural behavior of cold-formed stainless steel bolted connections
This paper presents a series of tests on cold-formed stainless steel bolted connections. The test specimens were fabricated from three different types of stainless steel, including austenitic stainless steel EN1.4301 (AISI 304) and EN1.4571 (AISI 316Ti having small amount of titanium) as well as lean duplex stainless steel EN1.4162 (AISI S32101). The material properties of the three types of st...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Transactions of the Architectural Institute of Japan
سال: 1962
ISSN: 0387-1185,2433-0027
DOI: 10.3130/aijsaxx.76.0_160