150 W LED Streetlight Optimal Design Using 21 W LED Engine
نویسندگان
چکیده
منابع مشابه
LED/OLED Design Using Mixed-Level Simulation
Dan Herrmann CAE Manager, Synopsys Introduction Over the last two decades, there has been extensive research to improve the design of light-emitting diodes (LEDs) to enhance light extraction efficiency, improve beam shaping, and allow color tuning. Techniques such as patterned substrates, polarization-sensitive gratings, back reflectors, surface textures, and phosphor down-conversion have all b...
متن کاملSpecification-led design
This paper shows how to combine a substantial part of the product development cycle of interactive devices into a single, co-ordinated approach. Much can be derived automatically from a suitable specification of the interactive device, and it can be derived automatically. Normal product development has a device specified and built, then has its manuals written, then it is used and tested. At th...
متن کاملMultiobjective optimal design of Light Emitting Diode (LED) lightings
In this paper, a Pareto multiobjective optimization is performed to design new luminaires, finding the optimal forward current, number of LEDs and proper heatsink by taking into account the cost, the energy consumption and the impact on the environment (life cycle analysis from cradle to grave). Three commercialized white LEDs have been studied and modelled in terms of optical, electrical, ther...
متن کاملA 36 W Wireless Power Transfer System with 82% Efficiency for LED Lighting Applications
This paper presents the design and implementation of an LED lighting module powered by a wireless power transfer system. The overall system achieves an efficiency of 82% with an output power of 36 W when the load resistance in the receiver is 30 Ω, which is the turn-on resistance of the LED lighting module. The transmitter of the system adopts ClassE power amplifier structure instead of Class-D...
متن کاملCo-Precipitation Synthesis and Optical Properties of Mn4+-Doped Hexafluoroaluminate w-LED Phosphors
Mn4+-activated hexafluoroaluminates are promising red-emitting phosphors for white light emitting diodes (w-LEDs). Here, we report the synthesis of Na₃AlF₆:Mn4+, K₃AlF₆:Mn4+ and K₂NaAlF₆:Mn4+ phosphors through a simple two-step co-precipitation method. Highly monodisperse large (~20 μm) smoothed-octahedron shaped crystallites are obtained for K₂NaAlF₆:Mn4+. The large size, regular shape and sma...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Korean Institute of Electrical and Electronic Material Engineers
سال: 2016
ISSN: 1226-7945
DOI: 10.4313/jkem.2016.29.1.62