1050) Mixing Water of Concrete, adding Surface Active Agent(Materials. Execution)
نویسندگان
چکیده
منابع مشابه
Possibility of Sea Water as Mixing Water in Concrete
In the near future, fresh water will be very difficult to get and scarce. It is said that in 2025 half of the mankind will live in the areas where fresh water is not enough. Also, UN and WMO are predicting 5 billion people will be in short of even drinking water. Also, in the present, there are some areas where sea water or chloride contained sand are used as mixing water with or without intens...
متن کاملPlan Execution Based on Active Perception: Adding Hints to Plans
In this paper we present a complete control architecture for a mobile robot which enables it to achieve a set of proposed goals with a high degree of autonomy and to react to the changing environment in real time. Autonomy and robustness are achieved through careful selection and incremental implementation of a set of basic Motor-Behaviors that interpret the sensor readings (sonar, vision and o...
متن کاملConcrete Mixing Methods and Concrete Mixers: State of the Art
As for all materials, the performance of concrete is determined by its microstructure. Its microstructure is determined by its composition, its curing conditions, and also by the mixing method and mixer conditions used to process the concrete. This paper gives an overview of the various types of mixing methods and concrete mixers commercially available used by the concrete industry. There are t...
متن کاملDistinguishing Anhydrate and Gypsum Scale in Mixing Incompatible Surface and Ground Waters During Water Injection Process
Determination of the type of precipitated calcium sulfate in mixing two incompatible injection and formation waters was studied experimentally in this work at two temperatures of 26oC and 80oC. Here the SEM, EDX and XRD techniques have been used to inspect the temperature effects on the morphology, type, and size of the precipitated calcium sulfate crystals. The result...
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
ذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Transactions of the Architectural Institute of Japan
سال: 1959
ISSN: 0387-1185,2433-0027
DOI: 10.3130/aijsaxx.63.1.0_197