100 W all fiber picosecond MOPA laser

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

A 100 W all-fiber linearly-polarized Yb-doped single-mode fiber laser at 1120 nm.

A 100 W-class all-fiber linearly-polarized single-mode fiber laser at 1120 nm with an optical efficiency of 50% was demonstrated. The laser consists of a 4.2 m long Yb-doped polarization maintaining fiber with a core diameter of 10 μm and a pair of FBGs written in matched passive fiber. Linearly polarized output with a polarization extinction ratio of 15 dB is achieved by a cavity that selects ...

متن کامل

Doping management for high-power fiber lasers: 100 W, few-picosecond pulse generation from an all-fiber-integrated amplifier.

Thermal effects, which limit the average power, can be minimized by using low-doped, longer gain fibers, whereas the presence of nonlinear effects requires use of high-doped, shorter fibers to maximize the peak power. We propose the use of varying doping levels along the gain fiber to circumvent these opposing requirements. By analogy to dispersion management and nonlinearity management, we ref...

متن کامل

High average power picosecond pulse generation from a thulium-doped all-fiber MOPA system.

We report a stable highly-integrated high power picosecond thulium-doped all-fiber MOPA system without using conventional chirped pulse amplification technique. The master oscillator was passively mode-locked by a SESAM to generate average power of 15 mW at a fundamental repetition rate of 103 MHz in a short linear cavity, and a uniform narrow bandwidth FBG is employed to stabilize the passivel...

متن کامل

201 W picosecond green laser using a mode-locked fiber laser driven cryogenic Yb:YAG amplifier system.

We have generated 201 W of green (514.5 nm) average power from a frequency-doubled picosecond cryogenic Yb:YAG laser system driven by a 50 MHz, 12.4 ps mode-locked Yb fiber laser producing 430 W of average power at 1029 nm, using direct pulse amplification. The fundamental beam produced was near-diffraction-limited (M(2)<1.3). Second-harmonic-generation is achieved using a 20 mm long noncritica...

متن کامل

Picosecond 554 nm yellow-green fiber laser source with average power over 1 W.

We demonstrate a source of 554 nm pulses with 2.7 ps pulse duration and 1.41 W average power, at a repetition rate of 300 MHz. The yellow-green pulse train is generated from the second harmonic of a 1.11 μm fiber laser source in periodically-poled stoichiometric LiTaO3. A total fundamental power of 2.52 W was used, giving a conversion efficiency of 56%.

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Optics Express

سال: 2009

ISSN: 1094-4087

DOI: 10.1364/oe.17.024008