10-Bit Full-Coverage Impedance Tuner Using a Directional Coupler and PIN Diodes
نویسندگان
چکیده
منابع مشابه
A SPICE model for simulating the impedance-frequency characteristics of high frequency PIN switching diodes
A SPICE model for the microwave and RF PIN switching diode is presented. The model simulates the important Iregion charge storage phenomenon and its effect on the PIN diode impedance-frequency characteristic. The SPICE model is described and validated by comparisons with both analytical and measured results.
متن کاملDesign of a 6db Directional Coupler Using Defected Ground Structure
This paper presents the design of 6dB directional coupler in C-band. A defected ground structure is used underneath the coupled region in order to relax the requirement for a narrow slot between the coupled lines. The simulated results show that the designed coupler exhibits a coupling of 6±0.1dB across the band 4.0 GHz to 4.5 GHz, when the spacing between the coupled lines is larger than 0.1 m...
متن کاملIntegrated-optical directional coupler biosensor.
We present measurements of biomolecular binding reactions, using a new type of integrated-optical biosensor based on a planar directional coupler structure. The device is fabricated by Ag(+) - Na(+) ion exchange in glass, and definition of the sensing region is achieved by use of transparent fluoropolymer isolation layers formed by thermal evaporation. The suitability of the sensor for applicat...
متن کاملAlGaAs Anode Heterojunction PIN Diodes
This paper describes the development of a heterojunction AlGaAs/GaAs PIN diode as a revolutionary improvement as compared to the homojunction GaAs PIN diode commonly used in microwave systems for commercial and military applications. In a heterojunction device the injected carriers from the junction are confined by the bandgap discontinuity between the AlGaAs/GaAs layers. This confinement effec...
متن کاملA Split-Block Waveguide Directional Coupler
A simple waveguide directional coupler is described which uses the split-block type of construction common in millimeter-wave components. The coupler uses an array of metal probes suspended on quartz stand-offs. Depending on the number of coupling elements, the coupling can be in the range 15-30 dB, with typically ± 2 dB variation across the waveguide band, and directivity > 10 dB. The coupler,...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: The Journal of Korean Institute of Electromagnetic Engineering and Science
سال: 2007
ISSN: 1226-3133
DOI: 10.5515/kjkiees.2007.18.7.698